SMC AMG350C-N04BC Water Separator, N.C. Auto Drain, 1,500 L/min, 1/2" NPT, Mounting Bracket

Product Information

While they’re not necessarily corrosion-resistant in the express sense, they shouldn’t necessarily break down just because they’re exposed to internal moisture or oil. They’re made out of sturdy material that should be able to maintain its structural integrity for some time even when used in this matter. Flow capacity, in terms of scfm, is where these devices different considerably. AM250 devices can handle 26.5, while AM650 devices can take as much as 212. That gives technicians the freedom to select a micro-mist separator device that matches their specific needs. Many pieces of compressed air-driven gear can, indeed, serve for years at a time. Even if it doesn’t seem like you have much of an issue to worry about, you’ll want to consider micro-mist separators that can remove many of these contaminants since they can help your equipment last longer than you’d have ever expected.

Each of these has a few things in common, which means you can’t go wrong regardless of which particular style you select for your company’s workflows. Individual AM Series Specifications Older filtration technology did work well, but it sometimes permitted smaller particles to make it through. Over time, these would start to build up and gum up the line. In some cases, very sophisticated manufacturing processes could be seriously compromised by this material.

Mist Separator AM

That translates into lower costs. While you might initially balk at the idea of buying yet another component for your pneumatic system, it can substantially reduce the total cost of ownership over time. That’s excellent news for anyone who has to deal with tight budgets and glance at a general ledger every few minutes. Consider the issue of companies that use sprayers, atomizers and other gear that’s designed to leverage the power of compressed air to transfer fluid into some sort of physical mist. Without a separator, this system can accidentally end up polluting itself. As a result, technicians in some circles consider these components to be nearly a requirement when designing certain types of powered implementations.

In fact, your technicians probably have all of the tools needed to install them right this minute. Consider the following parts, for example: AM Series Micro Mist Separators Even though air circuits are supposed to be theoretically airtight, nothing is ever truly perfect. Since there’s always the possibility of an absolutely microscopic hole forming in a line, there’s a chance that material can eventually make it into your company’s circuit. Small business owners may figure that they only need one or two parts like this to get the job done. If that’s the case, then thee can work independently and monitor only a single air circuit. Those who need to invest in more sophisticated manufacturing workflows can run several of them in concert.All of these pieces are more than capable of managing air as a fluid, and they can all handle a maximum operating pressure of around 150 PSI. Even if you start to increase the pressure, you’ll see that they’re still able to filter things down to 0.3µ without fail. While you shouldn’t ever exceed the manufacturer’s specifications, they’re durable enough to handle quite a bit of abuse.

Some technicians will point out that quite a bit of moisture can be generated by any line, so these have used outside of circuits that would be exposed to dirt material or oil. Other Uses For AM Series Components When that happens, it has nowhere to go but forward. If your connectors aren’t absolutely perfect, then there’s also another point of entry for this debris. Fortunately, a micro-mist separator can eliminate this. Newer workshops that are just starting to assemble a system can, therefore, select components from a wide array of catalog options. The circuit they put together will naturally be forward-compatible with equipment that they end up acquiring in the future.Will remove oil, water, and dirt from compressed air and is well suited for oil filtration following a piston compressor. The filter will remove materials 0.3 microns or larger with oil carry over 0.8 ppm or less. That translates into even some of the smallest components getting filtered out of the airstream. At the same time, any of the AM series micro-mist separators can work all the way down to 7 PSI without starting to underflow. Acceptable ambient and fluid temperature levels are just as flexible. You could easily operate these anywhere from 40-140°, which makes them suitable for almost any kind of manufacturing operation. More than likely, you have at least one installation where the particulate matter has been a problem. Lubricant oils are always an issue for those who work with machinery that has to be treated to keep it moving properly.