TRENDnet 8-Port Gigabit Long Range Poe+ Switch, TPE-LG80, 65W Poe Budget, Ethernet/Network Switch, Long-Range Poe+ Extends Range Up to 200M (656 ft.), 16 Gbps Switching Capacity, Lifetime Protection

Product Information

Another cool feature is the PoE prioritization. What it does is it assigns the highest priority to the port 1 and as you connect devices, the higher the port ID, the priority will be lower. So, if only seven ports out of the eight are connected, but the maximum power budget is already maxed out, the eight device will be declined, since it will have exceed the power budget. The Fast Ethernet is a term that refers to a traffic rate of 100Mbps (an upgrade over the usual 10Mbps rate), while the Gigabit Ethernet is a term that refers to a traffic rate of 1000Mbps.

Buffalo Technology is a North American subsidiary of the Japanese company Melco Holdings Inc. The Austin-based company is a fairly popular manufacturer of networking products and a leading provider of NAS devices, wireless routers and access points, external hard drives, network switches (both unmanaged and smart devices) and many other type of networking solutions. The second DIP switch activates the LR function for the third and fourth ports, while the fifth switch activates the LR function for the fifth port, the same as the sixth and the seventh DIP switch which activate the LR function for the sixth and seventh port (respectively). The third DIP switch has the role of activating the VLAN port isolation for the port one to four, which is a very useful feature for isolating IoT devices from the rest of your clients, so, in case one of them gets compromised, the infection doesn’t spread throughout the entire network. The fourth DIP switch enables QoS, so that VoIP traffic and basically anything from the Video & Voice spectrum gets reserved the highest priority. The NETGEAR ProSAFE GS108 went through several revisions (the latest being v4), but it has kept the same design, looking very similar to pretty much every other switch on the market. It doesn’t really excel from the aesthetic point of view, but switches are all about practicability.As you have probably guessed, you will find three main types of switches: unmanaged, Web-smart and managed switches. As expected from an unmanaged Plug-and-Play switch, the installation process is incredibly simple and all you have to do is connect the TPE-LG80 to a power source, use an Ethernet cable to connect it to a modem / router and add any other devices using the front panel ports (besides the usual access points or computers, you can also connect 802.3af PoE cameras and 802.3af PoE+ surveillance cameras). Netgear is a well known manufacturer of networking products, having a portfolio that covers consumer-level devices, as well as enterprise-type products. Among them, there are powerline adapters, routers (the Nighthawk series being incredibly popular), NAS devices, wireless VPN firewalls and ProSAFE switches.

VR Headsets and Headphones (including AirPods, Earbuds, and Over-the-Ear products) are only eligible for return if deemed defective. Zyxel has been gaining more and more traction in the SMB market and it is currently adjusting its platform to support enterprise-level networks as well. I have tested quite a few Ethernet switches from Zyxel and, indeed, the Nebula platform has only gotten better over the years, but today, I wish to focus on a particular device. I know that the manufacturers are a bit reticent with the move towards multi-Gigabit hardware, mainly due to the cost, which would imply some cut corners that may annoy the potential customers. The PoE (Power over Ethernet) technology refers to any system that passes electric power along with network data on an Ethernet cable.The unmanaged Ethernet switches have a special place on the market, allowing the user to gain more ports while requiring nothing more than the connection of a few cables and, while TRENDnet TPE-LG80 does fall in this category, it offers something that its competitors do not: the Long Range function that expands the PoE+ signal up to 656 feet on 7 of its 8 ports, QoS and VLAN port isolation, all that in a fanless compact case. The fourth DIP switch activates QOS, while the fifth DIP switch activates the LR function on the fifth Ethernet port. The sixth and seventh DIP switch will enable the LR ability to the sixth and seventh port, respectively and, lastly, the eighth DIP switch activates the VLAN port isolation to the port 5, 6 and 7. It is important to not switch on the DIP switch three and eight at the same time.

Every port features two LEDs: the left LED lights up if there is a connection of 100Mbps, the right LED lights up for a connection of 10Mbps. If both LEDs are ON at the same time, it means that there is a connection of 1000Mbps.

Since these type of switches are the middle ground between the unmanaged and the managed switches, it means that they will work great with small businesses, as they offer some degree of configurability (especially if the features of a managed switch may be overkill) and, usually, they come at a more reasonable price. If this are your needs, then yes, smart switches are perfect for you (again, take into consideration the advantages of PoE support).